Answer
Apr 04, 2022 - 11:51 AM
These are the dimensions for our Chemworld Glycol Feeder:
62” High x 26” Wide x 31” Deep
62” High x 26” Wide x 31” Deep
We call this outdoor rated because we have included a TEFC (totally enclosed fan cooled) motor as well as an outdoor rated remote contact.
Here are the motor specs:
- Item: General Purpose Motor
- Motor Enclosure Design: Totally Enclosed Fan-Cooled
- Motor Mounting Type: Face/Base
- HP: 1/2
- RPM Range: 1,701-1,800
- Voltage: 115/208-230V AC
- Frame: 56C
- Motor Thermal Protection: None
- Motor Service Factor: 1.15
- No. of Speeds: 1
- Voltage Compatibility: 115/200-230V AC, 115/208-230V AC, 115V AC, 208-230V AC
- Motor Application: General Application
- Nameplate RPM: 1,725
- Motor Frame Material: Steel
- Motor Shaft Design: Keyed
- Motor Shaft Rotation: CW/CCW
- Motor Design: Capacitor-Start
- Standards: CSA (258501), UL (E47479)
- RPM Group: 1701-1800
- Footnotes: 51
- Full Load Amps: 7.7/3.9-3.9
- Duty: Continuous
- Shaft Length: 1 7/8 in
- Hz: 60
- Motor Efficiency Group: Standard Efficient
- Frame Material: Steel
- Phase: Single
- Manufacturers Warranty Length: 1 yr
- Ins. Class: B
- Motor Bearings: Ball
- Length Less Shaft: 9 5/16 in
- Max. Ambient Temp.: 40 Degrees C
- Overall Length: 11 5/8 in
- Shaft Dia.: 5/8 in
- Nominal Efficiency: 69.4 %
- Duty Cycle: Continuous
This is the pump specs:
- Item: Rotary Gear Pump Head
- Port Size: 1/4 in
- Shaft Dia.: 0.5 in
- Length: 10 5/8 in
- HP @ 125 PSI @ 1725 RPM: 1 hp
- Design: Close Coupled
- Suction Lift @ 1725 RPM: 3.5 ft
- Max. Pressure: 125 psi
- Max. Viscosity: 550 SUS
- O-Ring Material: Buna N
- Gear: Fortron PPS Spur
- GPM @ 125 PSI @ 1725 RPM: 4.1 gpm
- Suction Lift: 3.5 ft
- GPM @ 100 PSI: 4.4
- HP @ 100 PSI: 1 hp
- GPM @ 50 PSI: 4.7
- GPM @ 75 PSI: 4.6 gpm
- GPM @ 25 PSI: 4.8 gpm
- Duty Rating: Heavy
- Height: 5 5/8 in
- Pump RPM: 1,725 RPM
- Shaft Material: 304 Stainless Steel
- HP @ Free Flow @ 1725 RPM: 0.5 hp
- Relief Valve: With
- HP @ Free Flow: 0.5 hp
- GPM @ Freeflow: 4.8
- GPM @ 125 PSI: 4.1 gpm
- GPM @ Freeflow @ 1725 RPM: 4.8 gpm
- HP @ 25 PSI: 0.5 hp
- Motor Frame: 56C
- Width: 5 5/8 in
- HP @ 75 PSI: 0.75 hp
- HP @ 50 PSI: 0.75 hp
- Temp. Range: -20 Degrees to 210 Degrees F
- HP @ 125 PSI: 1 hp
- Seal: Mechanical with Stainless Steel, Buna N, Carbon/Ceramic
- Pump Body Material: Bronze
- Length (Straight Wireway): 10 5/8 in